dmesg - 2012-03-28 19:49
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-20-generic (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu3) ) #32-Ubuntu SMP Thu Mar 22 02:22:46 UTC 2012 (Ubuntu 3.2.0-20.32-generic 3.2.12)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037f00000 (usable)
BIOS-e820: 0000000037f00000 - 0000000037f15000 (ACPI data)
BIOS-e820: 0000000037f15000 - 0000000037f80000 (ACPI NVS)
BIOS-e820: 0000000037f80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: Hewlett-Packard Presario V6000 (RM484EA#ABU) /30B7, BIOS F.43 03/22/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x37f00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f8920] f8920
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-0000000037f00000
0000000000 - 0037e00000 page 2M
0037e00000 - 0037f00000 page 4k
kernel direct mapping tables up to 37f00000 @ 1fffd000-20000000
RAMDISK: 35854000 - 36c22000
ACPI: RSDP 00000000000f88f0 00014 (v00 HP )
ACPI: RSDT 0000000037f0bcf9 0003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
ACPI: FACP 0000000037f14d10 00074 (v01 HP MCP51M 06040000 PTL_ 000F4240)
ACPI: DSDT 0000000037f0bd35 08FDB (v01 HP MCP51M 06040000 MSFT 03000000)
ACPI: FACS 0000000037f15fc0 00040
ACPI: SSDT 0000000037f14d84 00182 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
ACPI: MCFG 0000000037f14f06 0003C (v01 HP MCFG 06040000 LTP 00000000)
ACPI: HPET 0000000037f14f42 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 0000000037f14f7a 0005E (v01 HP ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0000000037f14fd8 00028 (v01 HP $SBFTBL$ 06040000 LTP 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000037f00000
Initmem setup node 0 0000000000000000-0000000037f00000
NODE_DATA [0000000037efb000 - 0000000037efffff]
[ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880034a00000-ffff8800357fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x00037f00
On node 0 totalpages: 229005
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 3516 pages used for memmap
DMA32 zone: 221508 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880037c00000 s83072 r8192 d23424 u1048576
pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 225420
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 680000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 865352k/916480k available (6565k kernel code, 460k absent, 50668k reserved, 6639k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 7340032 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1607.369 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.73 BogoMIPS (lpj=6429476)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 0037f80000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
ftrace: allocating 27049 entries in 107 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
System has AMD C1E enabled
Brought up 2 CPUs
Total of 2 processors activated (6429.39 BogoMIPS).
Switch to broadcast mode on CPU1
Switch to broadcast mode on CPU0
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at 37f15000 (438272 bytes)
print_constraints: dummy:
RTC time: 17:49:23, date: 03/28/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, fe0bffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x40000000-0xfcffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff]
pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff]
pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff]
pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A03:00: host bridge window [mem 0x000e8000-0x000ebfff]
pci_root PNP0A03:00: host bridge window [mem 0x000ec000-0x000effff]
pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff]
pci_root PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d0fff])
pci 0000:00:00.0: [10de:02f0] type 0 class 0x000500
pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
pci 0000:00:02.0: [10de:02fc] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: [10de:02fd] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:05.0: [10de:0244] type 0 class 0x000300
pci 0000:00:05.0: reg 10: [mem 0xb2000000-0xb2ffffff]
pci 0000:00:05.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:05.0: reg 1c: [mem 0xb1000000-0xb1ffffff 64bit]
pci 0000:00:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:09.0: [10de:0270] type 0 class 0x000500
pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601
pci 0000:00:0a.0: reg 10: [io 0x1d00-0x1d7f]
pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05
pci 0000:00:0a.1: reg 20: [io 0x3040-0x307f]
pci 0000:00:0a.1: reg 24: [io 0x3000-0x303f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
pci 0000:00:0a.3: [10de:0271] type 0 class 0x000b40
pci 0000:00:0a.3: reg 10: [mem 0xb0040000-0xb007ffff]
pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03
pci 0000:00:0b.0: reg 10: [mem 0xb0004000-0xb0004fff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03
pci 0000:00:0b.1: reg 10: [mem 0xb0005000-0xb00050ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101
pci 0000:00:0d.0: reg 20: [io 0x3080-0x308f]
pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101
pci 0000:00:0e.0: reg 10: [io 0x30c0-0x30c7]
pci 0000:00:0e.0: reg 14: [io 0x30b4-0x30b7]
pci 0000:00:0e.0: reg 18: [io 0x30b8-0x30bf]
pci 0000:00:0e.0: reg 1c: [io 0x30b0-0x30b3]
pci 0000:00:0e.0: reg 20: [io 0x3090-0x309f]
pci 0000:00:0e.0: reg 24: [mem 0xb0006000-0xb0006fff]
pci 0000:00:10.0: [10de:026f] type 1 class 0x000604
pci 0000:00:10.1: [10de:026c] type 0 class 0x000403
pci 0000:00:10.1: reg 10: [mem 0xb0000000-0xb0003fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:14.0: [10de:0269] type 0 class 0x000680
pci 0000:00:14.0: reg 10: [mem 0xb0008000-0xb0008fff]
pci 0000:00:14.0: reg 14: [io 0x30e0-0x30e7]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.0: bridge window [mem 0xb4000000-0xb5ffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:03.0: bridge window [mem 0xb6000000-0xb7ffffff]
pci 0000:00:03.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:10.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:10.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11
ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10
ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10
vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:05.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 0000000037f00000 - 0000000037ffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0xe0000000-0xefffffff]
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [mem 0xffc00000-0xffffffff]
pnp 00:01: [mem 0xfec00000-0xfec00fff]
pnp 00:01: [mem 0xfee00000-0xfeefffff]
pnp 00:01: [mem 0xfed00000-0xfed00fff]
system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [bus 00-ff]
pnp 00:02: [io 0x0cf8-0x0cff]
pnp 00:02: [io 0x0000-0x0cf7 window]
pnp 00:02: [io 0x0d00-0xffff window]
pnp 00:02: [mem 0x000a0000-0x000bffff window]
pnp 00:02: [mem 0x000c0000-0x000c3fff window]
pnp 00:02: [mem 0x000c4000-0x000c7fff window]
pnp 00:02: [mem 0x000c8000-0x000cbfff window]
pnp 00:02: [mem 0x000cc000-0x000cffff window]
pnp 00:02: [mem 0x000d0000-0x000d3fff window]
pnp 00:02: [mem 0x000d4000-0x000d7fff window]
pnp 00:02: [mem 0x000d8000-0x000dbfff window]
pnp 00:02: [mem 0x000dc000-0x000dffff window]
pnp 00:02: [mem 0x000e0000-0x000e3fff window]
pnp 00:02: [mem 0x000e4000-0x000e7fff window]
pnp 00:02: [mem 0x000e8000-0x000ebfff window]
pnp 00:02: [mem 0x000ec000-0x000effff window]
pnp 00:02: [mem 0x000f0000-0x000fffff window]
pnp 00:02: [mem 0x40000000-0xfebfffff window]
pnp 00:02: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:03: [mem 0xe0000000-0xefffffff]
system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x1000-0x107f]
pnp 00:04: [io 0x1080-0x10ff]
pnp 00:04: [io 0x1400-0x147f]
pnp 00:04: [io 0x1480-0x14ff]
pnp 00:04: [io 0x1800-0x187f]
pnp 00:04: [io 0x1880-0x18ff]
pnp 00:04: [io 0x2000-0x203f]
system 00:04: [io 0x1000-0x107f] has been reserved
system 00:04: [io 0x1080-0x10ff] has been reserved
system 00:04: [io 0x1400-0x147f] has been reserved
system 00:04: [io 0x1480-0x14ff] has been reserved
system 00:04: [io 0x1800-0x187f] has been reserved
system 00:04: [io 0x1880-0x18ff] has been reserved
system 00:04: [io 0x2000-0x203f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0010-0x001f]
pnp 00:05: [io 0x0022-0x003f]
pnp 00:05: [io 0x0044-0x005f]
pnp 00:05: [io 0x0068-0x006f]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0091-0x0093]
pnp 00:05: [io 0x0097-0x009f]
pnp 00:05: [io 0x00a2-0x00bf]
pnp 00:05: [io 0x00e0-0x00ef]
pnp 00:05: [io 0x0360-0x0361]
pnp 00:05: [io 0x0380-0x0383]
pnp 00:05: [io 0x04d0-0x04d1]
system 00:05: [io 0x0360-0x0361] has been reserved
system 00:05: [io 0x0380-0x0383] has been reserved
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0000-0x0008]
pnp 00:06: [io 0x000a-0x000f]
pnp 00:06: [io 0x0081-0x0083]
pnp 00:06: [io 0x0087]
pnp 00:06: [io 0x0089-0x008b]
pnp 00:06: [io 0x008f]
pnp 00:06: [io 0x00c0-0x00d1]
pnp 00:06: [io 0x00d4-0x00df]
pnp 00:06: [dma 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io 0x00f0-0x00f1]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: [io 0x0070-0x0071]
pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0a: [irq 0 disabled]
pnp 00:0a: [irq 8]
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0c: [irq 12]
pnp 00:0c: Plug and Play ACPI device, IDs SYN012a SYN0100 SYN0002 PNP0f13 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:05.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:02.0: bridge window [mem 0xb4000000-0xb5ffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:03.0: bridge window [mem 0xb6000000-0xb7ffffff]
pci 0000:00:03.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 07-07]
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 18 [mem 0x40000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xb4000000-0xb5ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xb6000000-0xb7ffffff]
pci_bus 0000:03: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:07: resource 10 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:07: resource 11 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:07: resource 12 [mem 0x000dc000-0x000dffff]
pci_bus 0000:07: resource 13 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:07: resource 14 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:07: resource 15 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:07: resource 16 [mem 0x000ec000-0x000effff]
pci_bus 0000:07: resource 17 [mem 0x000f0000-0x000fffff]
pci_bus 0000:07: resource 18 [mem 0x40000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:05.0: Boot video device
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
pci 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22
pci 0000:00:0b.0: PCI INT A disabled
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
pci 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22
pci 0000:00:0b.1: PCI INT B disabled
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
PCI: CLS 64 bytes, default 64
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1332956963.608:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1690
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: processor limited to max C-state 1
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (38 C)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ERST: Table is not found!
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Freeing initrd memory: 20280k freed
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
pata_acpi 0000:00:0d.0: setting latency timer to 64
pata_acpi 0000:00:0e.0: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
pata_acpi 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23
pata_acpi 0000:00:0e.0: setting latency timer to 64
pata_acpi 0000:00:0e.0: PCI INT A disabled
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:09: RTC can wake from S4
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Magic number: 4:676:846
rtc_cmos 00:09: setting system clock to 2012-03-28 17:49:24 UTC (1332956964)
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 (2 cpu cores) (version 2.20.00)
powernow-k8: fid 0x8 (1600 MHz), vid 0x13
powernow-k8: fid 0x0 (800 MHz), vid 0x1e
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1608k freed
Freeing unused kernel memory: 1200k freed
udevd[121]: starting version 175
wmi: Mapper loaded
acpi device:23: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input5
ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[drm] Initialized drm 1.1.0 20060810
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
ata2: port disabled--ignoring
VGA switcheroo: detected Optimus DSM method \ handle
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20
forcedeth 0000:00:14.0: setting latency timer to 64
ata1.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH15, max MWDMA2
ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
ata1.00: configured for MWDMA2
scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH15 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:16:36:8f:f1:74
forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3
sata_nv 0000:00:0e.0: version 3.5
sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23
ata4: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23
nouveau 0000:00:05.0: power state changed by ACPI to D0
nouveau 0000:00:05.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18
nouveau 0000:00:05.0: PCI INT A -> Link[LK3E] -> GSI 18 (level, high) -> IRQ 18
nouveau 0000:00:05.0: setting latency timer to 64
[drm] nouveau 0000:00:05.0: Detected an NV40 generation card (0x04e000a2)
[drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:00:05.0: ... appears to be valid
[drm] nouveau 0000:00:05.0: BIT BIOS found
[drm] nouveau 0000:00:05.0: Bios version 05.51.28.53
[drm] nouveau 0000:00:05.0: TMDS table version 1.1
[drm] nouveau 0000:00:05.0: TMDS table script pointers not stubbed
[drm] nouveau 0000:00:05.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:00:05.0: Raw DCB entry 0: 03005313 00000004
[drm] nouveau 0000:00:05.0: Raw DCB entry 1: 02010300 00000023
[drm] nouveau 0000:00:05.0: Raw DCB entry 2: 024123f1 0040c080
[drm] nouveau 0000:00:05.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:00:05.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:00:05.0: 1: 0x00000131: type 0x31 idx 1 tag 0xff
[drm] nouveau 0000:00:05.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:00:05.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:00:05.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:00:05.0: 5: 0x00000340: type 0x40 idx 5 tag 0xff
[drm] nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xE225
[drm] nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xE364
[drm] nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xE365
[drm] nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xE4E7
[drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001305 not verified ===
[drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001401 not verified ===
[drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001405 not verified ===
[drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x00001409 not verified ===
[drm] nouveau 0000:00:05.0: === C51 misaligned reg 0x0000140D not verified ===
[drm] nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xE533
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: ST940210AS, 3.ALC, max UDMA/100
ata3.00: 78140160 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA ST940210AS 3.AL PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
[drm] nouveau 0000:00:05.0: 3 available performance level(s)
[drm] nouveau 0000:00:05.0: 0: core 100MHz shader 100MHz voltage 1000mV fanspeed 100%
[drm] nouveau 0000:00:05.0: 1: core 350MHz shader 350MHz voltage 1100mV fanspeed 100%
[drm] nouveau 0000:00:05.0: 2: core 425MHz shader 425MHz voltage 1200mV fanspeed 100%
[drm] nouveau 0000:00:05.0: c:
[TTM] Zone kernel: Available graphics memory: 444680 kiB.
[TTM] Initializing pool allocator.
sd 2:0:0:0: [sda] Attached SCSI disk
[drm] nouveau 0000:00:05.0: Detected 128MiB VRAM
[drm] nouveau 0000:00:05.0: 64 MiB GART (aperture)
[drm] nouveau 0000:00:05.0: ACPI backlight interface available, not registering our own
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 0)
[drm] nouveau 0000:00:05.0: Calling LVDS script 6:
[drm] nouveau 0000:00:05.0: 0xD3CD: Parsing digital output script table
ata4: SATA link down (SStatus 0 SControl 300)
[drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 1)
[drm] nouveau 0000:00:05.0: Setting dpms mode 3 on TV encoder (output 2)
[drm] nouveau 0000:00:05.0: allocated 1280x800 fb: 0x49000, bo ffff880035e2e400
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 0.0.16 20090420 for 0000:00:05.0 on minor 0
CE: hpet increased min_delta_ns to 11520 nsec
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
Adding 915452k swap on /dev/sda5. Priority:-1 extents:1 across:915452k
udevd[511]: starting version 175
lp: driver loaded but no devices found
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
i2c i2c-3: nForce2 SMBus adapter at 0x3040
i2c i2c-4: nForce2 SMBus adapter at 0x3000
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
input: HP WMI hotkeys as /devices/virtual/input/input6
NV_TCO: NV TCO WatchDog Timer Driver v0.01
NV_TCO: Watchdog reboot not detected.
NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
init: flush-early-job-log main process (796) terminated with status 1
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
snd_hda_intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, high) -> IRQ 21
hda_intel: Disabling MSI
snd_hda_intel 0000:00:10.1: setting latency timer to 64
hda_codec: CX20549 (Venice): BIOS auto-probing.
type=1400 audit(1332956979.899:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=762 comm="apparmor_parser"
type=1400 audit(1332956979.899:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=762 comm="apparmor_parser"
type=1400 audit(1332956979.899:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=762 comm="apparmor_parser"
type=1400 audit(1332956979.923:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=757 comm="apparmor_parser"
type=1400 audit(1332956979.923:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=757 comm="apparmor_parser"
type=1400 audit(1332956979.923:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=757 comm="apparmor_parser"
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input8
init: failsafe main process (824) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1332956985.735:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=942 comm="apparmor_parser"
type=1400 audit(1332956985.735:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=942 comm="apparmor_parser"
type=1400 audit(1332956986.191:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=971 comm="apparmor_parser"
type=1400 audit(1332956986.191:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=971 comm="apparmor_parser"
type=1400 audit(1332956986.191:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=971 comm="apparmor_parser"
[drm] nouveau 0000:00:05.0: Calling LVDS script 2:
[drm] nouveau 0000:00:05.0: 0xD432: Parsing digital output script table
type=1400 audit(1332956987.291:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=973 comm="apparmor_parser"
type=1400 audit(1332956987.291:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=973 comm="apparmor_parser"
[drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 0)
[drm] nouveau 0000:00:05.0: Calling LVDS script 5:
[drm] nouveau 0000:00:05.0: 0xD3B6: Parsing digital output script table
[drm] nouveau 0000:00:05.0: Output LVDS-1 is running on CRTC 0 using output A
type=1400 audit(1332956987.919:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=987 comm="apparmor_parser"
type=1400 audit(1332956987.919:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=987 comm="apparmor_parser"
type=1400 audit(1332956988.027:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=991 comm="apparmor_parser"
eth0: no IPv6 routers present
[drm] nouveau 0000:00:05.0: Setting dpms mode 1 on lvds encoder (output 0)
[drm] nouveau 0000:00:05.0: Calling LVDS script 6:
[drm] nouveau 0000:00:05.0: 0xD3CD: Parsing digital output script table
[drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 0)
[drm] nouveau 0000:00:05.0: Calling LVDS script 2:
[drm] nouveau 0000:00:05.0: 0xD432: Parsing digital output script table
[drm] nouveau 0000:00:05.0: Calling LVDS script 5:
[drm] nouveau 0000:00:05.0: 0xD3B6: Parsing digital output script table
[drm] nouveau 0000:00:05.0: Setting dpms mode 1 on lvds encoder (output 0)
[drm] nouveau 0000:00:05.0: Calling LVDS script 6:
[drm] nouveau 0000:00:05.0: 0xD3CD: Parsing digital output script table
[drm] nouveau 0000:00:05.0: Setting dpms mode 2 on lvds encoder (output 0)
[drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 0)
[drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 0)
[drm] nouveau 0000:00:05.0: Calling LVDS script 2:
[drm] nouveau 0000:00:05.0: 0xD432: Parsing digital output script table
[drm] nouveau 0000:00:05.0: Calling LVDS script 5:
[drm] nouveau 0000:00:05.0: 0xD3B6: Parsing digital output script table
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 0:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
ata1.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: link is slow to respond, please be patient (ready=0)
ata1: device not ready (errno=-16), forcing hardreset
ata1: soft resetting link
ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
ata1.00: configured for MWDMA2
ata1: EH complete
ata1.00: qc timeout (cmd 0xa0)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata1.00: status: { DRDY ERR }
ata1: link is slow to respond, please be patient (ready=0)
ata1: device not ready (errno=-16), forcing hardreset
ata1: soft resetting link
ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
ata1.00: configured for MWDMA2
ata1: EH complete
ata1.00: qc timeout (cmd 0xa0)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata1.00: status: { DRDY ERR }
ata1: link is slow to respond, please be patient (ready=0)
ata1: device not ready (errno=-16), forcing hardreset
ata1: soft resetting link
ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
ata1.00: configured for MWDMA2
ata1: EH complete
[drm] nouveau 0000:00:05.0: Setting dpms mode 1 on lvds encoder (output 0)
[drm] nouveau 0000:00:05.0: Calling LVDS script 6:
[drm] nouveau 0000:00:05.0: 0xD3CD: Parsing digital output script table